Please wait...
The product was added to the shopping cart. View shopping cart
Cart is empty

BLAZE Audio PowerZone Connect 252 EU 2x125W 4-8 Ohm 1x250W 100V 125W 16 Ohm

Frontpage Components HI-FI/Stereo BLAZE Audio PowerZone Connect 252 EU 2x125W 4-8 Ohm 1x250W 100V 125W 16 Ohm
You have to log in to shop/see prices.
BLAZE Audio PowerZone Connect 252 EU 2x125W 4-8 Ohm 1x250W 100V 125W 16 Ohm (UBX-888-005)

BLAZE Audio PowerZone Connect 252 EU 2x125W 4-8 Ohm 1x250W 100V 125W 16 Ohm

SKU:
UBX-888-005
EAN:
5745000268078
  • Type Amplifier
In stock
Description

PowerZone Connect 252

Features:
  • DSP – full matrix DSP embedded and controlled via TCP/IP
  • Targeted Constant Voltage – Optimal hybrid of Lo-Z & Hi-Z performance
  • Master / Slave functionality – S/PDIF link to multiple amps
  • Power share – Support power sharing up to 250W per channel
  • Market proven reliability – Based on Pascal’s proven technologies
  • UREC™ universal power supply with PFC
Specifications:
  • Total System Power 250 W
  • Output Power @ 4/8Ω 2 x 125 W
  • Output Power @ 70/100V* 1 x 250 W
  • Powershare (up to) Across all channels** 1 x 250 W
  • Power Consumption 75W
  • Dimensions 44 x 220 x 213 mm (1.7 x 8.7 x 8.4 in)
  • Weight 2kg (4.4 lbs)
  • Output Circuitry UMAC™ Class D - full bandwidth PWM modulator with ultra-low distortion
  • Output Voltage 70Vp / 140Vpp (unloaded) // Bridged 140Vp / 280 Vpp (unloaded)
  • Signal To Noise-Ratio >106dB (A-weighted, 20Hz-20kHz, 8Ω load)
  • THD+N (typical) < 0.05% (20Hz-20kHz, 8Ω load, 3dB below rated power)
  • Frequency Response 20Hz-20kHz (+0/-0.25dB (8Ω load, 3dB below rated power)
  • Protection Circuits Short circuit -, DC -, Undervoltage -, Temperature - and Overload protection
  • Power Supply UREC™ universal mains switch mode power supply with Power Factor Correction (PFC) and standby converter
  • Operating temperature 0-40°C
  • Operating Voltage/Frequency Universal Mains, 100V-240V, 50Hz-60Hz
  • Standby Consumption < 0.5W
  • Accessories 2x Rack ears 1x ½ rack plate extension 2x ½ rack mounting 2x Rear supports
  • Power Ratings 1% THD @ 120Vac and 230Vac

Please note that although care has been taken in the degree of relevancy, pictures are for display purposes only, and product appearance may differ from what you see. If there are any discrepancies between the product headline, description and picture, the correct information will be in the product headline (i.e. computer systems may not come with monitors even if pictured that way). If anything is unclear, please email support before placing your order.